Double-blade mower

DMS Side mower

Double knife side mower

Efficient mowing with working width from 1.50 m up to 3.75 m and power consumption from 1.5 kW/m working width

low power-to-weight ratio
environmentally friendly mowing technology
Low power consumption

Double blade side mower DMS

Due to its low power-to-weight ratio, the SAUERBURGER DMS double-blade side mower can be operated with vehicles with an engine output of 50 hp or more. Due to the massive construction of the DMS, it can also be mounted on powerful tractors. The mechanical side shift allows the mower to be conveniently adjusted to either the tractor’s outer width or the overcut to the front mower.

The lightness of the mower units, the low power consumption and the resulting fuel savings enable a very economical and ecologically valuable mode of operation.

The DMS is available as a right-hand or left-hand boom for front or rear mounting.

Double blades are gentle on the insects

The double blade technology meets the demands for an environmentally and insect-friendly mowing technique for all green and nature conservation areas. The gentle shear cut and the gentle depositing of the forage (clippings) behind the cutter bar ensures maximum protection of all living creatures. With the appropriate cutting height, even ground-nesting birds are not endangered.

The neatly cut plant stems reduce the bleeding of the cuts and thus favour regrowth.

The wide, even crop placement also improves the drying process, which is why tedding (turning) of the crop can be reduced.

The gentle, non-rotating cut of the double knife does not spread dirt in the crop, resulting in significantly less forage contamination.

Variable application possibilities

Perfekt in Kombination mit einem DMF
Heck- und Frontanbau
Rechts- oder Linksausleger
Rechts- oder Linksausleger
Ideal zum Anbauen an eine Raupe
Rechts- oder Linksausleger
für verschiedene Schlepperbreiten
lange Schwadbleche
Ausführung Grassamenernte
mit Grasniederhalter und Halmteiler
für eine saubere Schwadbildung
Hydr. Linearverschiebung
Hydr. Antrieb über Aggregat
durch Schlepperzapfwelle

Technical solutions

Mechanische Anfahrsicherung

Mechanische Seitenverschiebung durch geklemmten Tragarm


Im Gehäuse geschützter Drehzahlsensor


Digitale Drehzahlanzeige

Parallel geschaltete Zylinder zum Ausheben und Absenken des Schneidwerks

Das Schneidwerk wird über zwei Zylinder ohne Verletzung der Grasnarbe ausgehoben bzw. abgesenkt.

Working width
Transport height
Number of skid shoes
DMS 1500
1,50 m
2,00 m
3 pcs
340 kg
DMS 1650
1,65 m
2,15 m
3 pcs
345 kg
DMS 1900
1,90 m
2,39 m
3 pcs
355 kg
DMS 2100
2,10 m
2,59 m
3 pcs
360 kg
DMS 2400
2,40 m
2,88 m
4 pcs
370 kg
DMS 2750
2,75 m
3,22 m
4 pcs
380 kg
DMS 3100
3,10 m
3,57 m
4 pcs
390 kg
DMS 3360
3,36 m
3,82 m
4 pcs
400 kg
DMS 3750
3,75 m
4,20 m
4 pcs
410 kg

Standard features

Three-point linkage cat. I+II
BIDUX - cutting units with unequal blade pitch 70 / 84 mm CARBODUX knife blades serrated
Drive via tractor hydraulics (delivery rate up to 30 L/min, max. 180 bar)
Hardox outsoles (30 mm - 250 mm)
Digital speed display
Hydraulic traction amplification
Standard hydraulic couplings BG3
Mechanically adjustable collision protection
Mechanical lateral displacement

Special features

Hydr. Drive via power unit through tractor PTO 540 rpm
Hydr. Drive via power unit by tractor PTO 1000 rpm,
Spare blades 1 set
Swath plate and mounting parts
Outer shoe with swath plate, mounting parts and rod (only for right-hand boom)
Swath plates long (pair)
Swath drums (pair)
Upper and lower knife smooth
Euro 8 and various yard/wheel loader mounts with parallelogram guidance
Hydraulic lateral displacement
Execution grass seed harvest
Hydraulic plug-in coupling flat sealing
Reinforcement profile for cutterbar
Outsoles 260 mm wide
Additional set of outsoles for cutting unit
Replacement Knife Blades & Countersunk Rivets
Hydraulic oil cooler

Have we sparked your interest

Write us. Or just call us directly: +49 (0) 7668 / 9032-0