Double-blade mower

DMF40 front mower

Double knives front mower

Efficient mowing with working width from 1.65 m up to 2.75 m and power consumption from 1.5 kW/m working width

Lightweight construction
Environmentally friendly mowing technology
Low power consumption
environmentally friendly mowing technology

Double blade front mower DMF 40

The SAUERBURGER double-blade front mower DMF 40 is, due to its light construction, very suitable for mounting on small carrier vehicles with an engine power of up to 70 HP. Due to the slim design, it is also possible to operate the mower with a radio-controlled crawler.

The design, low power consumption and environmentally friendly mowing technology make the DMF 40 the ideal mower for maintaining municipal and nature conservation areas.

Double blades are gentle on the insects

The double blade technology meets the demands for an environmentally and insect-friendly mowing technique for all green and nature conservation areas. The gentle shear cut and the gentle depositing of the forage (clippings) behind the cutter bar ensures maximum protection of all living creatures. With the appropriate cutting height, even ground-nesting birds are not endangered.

The neatly cut plant stems reduce the bleeding of the cuts and thus favour regrowth.

The wide, even crop placement also improves the drying process, which is why tedding (turning) of the crop can be reduced.

The gentle, non-rotating cut of the double knife does not spread dirt in the crop, resulting in significantly less forage contamination.

Variable application possibilities

Hydr. Antrieb über Aggregat
durch Schlepperzapfwelle
Schwadbleche
DMF40 für Solaranlage
mechanische Federentlastung
Euro 8 Frontladeraufnahme
mit Parallelogrammführung
Gerätedreieck

Standard features

Pendulum three-point trestle cat. I+II
BIDUX - Cutting units with unequal blade pitch 70 / 84 mm
CARBODUX knife blades serrated
Drive via tractor hydraulics (delivery rate up to 30 L/min, max. 180 bar)
Hardox outsoles (30 mm - 250 mm)
Digital speed display
Standard hydraulic couplings BG3
Drawbar instead of top link

Special features

Hydr. Drive via power unit through tractor PTO 540 rpm
Hydr. Drive via power unit through tractor PTO 1000 rpm
PTO shaft rotation direction clockwise, facing tractor stub end
Spare blades 1 set
Euro 8 and various yard / wheel loader receptacles
Device triangle cat 0
Device triangle Cat. 1, 2, 3
Device triangle municipal
Upper and lower knife smooth
Parallelogram guide
Swath plates (pair)
Lighting system
Mechanical spring relief
Hydraulic plug-in coupling flat sealing
Outsoles 260 mm wide
Additional set of outsoles for cutting unit
Replacement Knife Blades & Countersunk Rivets
Hydraulic oil cooler

Have we sparked your interest

Write us. Or just call us directly: +49 (0) 7668 / 9032-0